SFCE (3000 PSI)

SAE external thread flange



Properties

Design SAE external thread flange
Construction straight
Scope of supply connecting piece only
Standard DIN 3901/3902
Surface electro galvanised
Material S355J2G3 (C22)

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
SFCE 3001 L15 L 15 315 1/2" M22x1,5 30,2 20 38,1 17,5 48,2 7,0 8,7 M 8 x 30 5/16" x 1.1/4"
SFCE 3002 L18 L 18 315 3/4" M26x1,5 38,1 20 47,6 22,2 53,2 7,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3002 L22 L 22 160 3/4" M30x2 38,1 19 47,6 22,2 53,2 7,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3002 L28 L 28 160 3/4" M36x2 38,1 19 47,6 22,2 53,2 7,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3003 L28 L 28 160 1" M36x2 44,4 24 52,4 26,2 54,2 7,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3004 L28 L 28 160 1.1/4" M36x2 50,8 22 58,7 30,2 58,6 7,5 *1 *2 7/16" x 1.1/2"
SFCE 3004 L35 L 35 160 1.1/4" M45x2 50,8 32 58,7 30,2 58,2 10,5 *1 *2 7/16" x 1.1/2"
SFCE 3005 L42 L 42 160 1.1/2" M52x2 60,3 36 69,9 35,7 64,2 11,0 13,5 M 12 x 40 1/2" x 1.1/2"
SFCE 3001 S16 S 16 350 1/2" M24x1,5 30,2 13 38,1 17,5 50,2 8,5 8,7 M 8 x 30 5/16" x 1.1/4"
SFCE 3002 S20 S 20 350 3/4" M30x2 38,1 20 47,6 22,2 57,2 10,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3002 S25 S 25 350 3/4" M36x2 38,1 17 47,6 22,2 57,2 12,0 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3003 S25 S 25 315 1" M36x2 44,4 20 52,4 26,2 58,2 12,0 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3003 S30 S 30 315 1" M42x2 44,4 24 52,4 26,2 63,2 13,5 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 3004 S25 S 25 250 1.1/4" M36x2 50,8 27 58,7 30,2 60,2 12,0 *1 *2 7/16" x 1.1/2"
SFCE 3004 S30 S 30 250 1.1/4" M42x2 50,8 28 58,7 30,2 62,2 13,5 *1 *2 7/16" x 1.1/2"
SFCE 3004 S38 S 38 250 1.1/4" M52x2 50,8 28 58,7 30,2 66,6 16,0 *1 *2 7/16" x 1.1/2"
SFCE 3005 S38 S 38 200 1.1/2" M52x2 60,3 32 69,9 35,7 70,2 16,0 13,5 M 12 x 40 1/2" x 1.1/2"
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.