SFCE (6000 PSI)

SAE external thread flange



Properties

Design SAE external thread flange
Construction straight
Scope of supply connecting piece only
Standard DIN 3901/3902
Surface electro galvanised
Material S355J2G3 (C22)

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm Ø B mm G1 mm G2 mm I mm L mm M metr. M unc
Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm Ø B mm G1 mm G2 mm I mm L mm M metr. M unc
SFCE 6001 S16 S 16 400 1/2" M24x1,5 31,7 12 53,2 63 8,5 8,5 M 8 x 30 5/16" x 1.1/4"
SFCE 6002 S16 S 16 400 3/4" M24x1,5 41,3 12 59,2 69 8,5 10,5 M 10 x 35 3/8" x 1.1/2"
SFCE 6002 S20 S 20 400 3/4" M30x2 41,3 16 61,2 72 10,5 10,5 M 10 x 35 3/8" x 1.1/2"
SFCE 6002 S25 S 25 400 3/4" M36x2 41,3 17 63,2 75 12,0 10,5 M 10 x 35 3/8" x 1.1/2"
SFCE 6002 S30 S 30 400 3/4" M42x2 41,3 18 64,0 77 13,5 10,5 M 10 x 35 3/8" x 1.1/2"
SFCE 6003 S25 S 25 400 1" M36x2 47,6 20 72,2 84 12,0 *1 M 12 x 45 7/16" x 1.3/4"
SFCE 6003 S30 S 30 400 1" M42x2 47,6 24 74,0 87 13,5 *1 M 12 x 45 7/16" x 1.3/4"
SFCE 6004 S30 S 30 400 1.1/4" M42x2 54,0 30 79,2 92 13,5 *2 M 14 x 50 1/2" x 1.3/4"
SFCE 6004 S38 S 38 350 1.1/4" M52x2 54,0 30 83,2 98 16,0 *2 M 14 x 50 1/2" x 1.3/4"
SFCE 6005 S38 S 38 350 1.1/2" M52x2 63,5 30 89,2 104 16,0 16,7 M 16 x 55 1/2" x 1.3/4"
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.