SFCE 90 (6000 PSI)

SAE flange adapter, soldered



Properties

Construction type soldered
Design SAE flange adapter
Construction Angle 90°
Scope of supply connecting piece only
Standard DIN 3901/3902
Surface electro galvanised
Material S355J2G3 (C22)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm I mm S1 mm S2 mm S3 mm AF mm L mm M metr. M unc
Product Name Series Ø RAD mm PB 10.9 bar Size A A1 mm I mm S1 mm S2 mm S3 mm AF mm L mm M metr. M unc
SFCE 6002-90 S25 S 25 400 3/4" M36x2 41,3 12,0 62 59,0 83 36 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 6002-90 S30 S 30 400 3/4" M42x2 41,3 13,5 62 57,5 84 46 10,7 M 10 x 35 3/8" x 1.1/2"
SFCE 6003-90 S25 S 25 400 1" M36x2 47,6 12,0 74 73,0 97 36 *1 M 12 x 45 7/16" x 1.3/4"
SFCE 6003-90 S30 S 30 400 1" M42x2 47,6 13,5 74 71,5 98 46 *1 M 12 x 45 7/16" x 1.3/4"
SFCE 6004-90 S38 S 38 315 1.1/4" M52x2 54,0 16,0 96 91,0 122 55 *2 M 14 x 50 1/2" x 1.3/4"
SFCE 6005-90 S38 S 38 315 1.1/2" M52x2 63,5 16,0 111 91,0 122 55 17,0 M 16 x 55 5/8" x 2"
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.