SFH (3000 PSI / 6000 PSI) VA

SAE flange half



Properties

Design SAE flange half
Mounting Screw bore hole
Scope of supply flange only
Standard SAE J518, ISO 6162-1 /-2
Material Stainless steel

Hints

Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Pressure series Flange size PB 10.9 bar A mm B mm C mm D mm L mm M metr. M unc
Product Name Pressure series Flange size PB 10.9 bar A mm B mm C mm D mm L mm M metr. M unc
SFH 13 VA 3000 PSI 1/2" 350 31,0 6,2 38,1 54 8,7 M 8 x 25 5/16" x 1.1/4"
SFH 20 VA 3000 PSI 3/4" 350 38,9 6,2 47,6 65 10,7 M 10 x 30 3/8" x 1.1/4"
SFH 25 VA 3000 PSI 1" 315 45,2 7,5 52,4 70 10,7 M 10 x 30 3/8" x 1.1/4"
SFH 32 VA 3000 PSI 1.1/4" 250 51,6 7,5 58,7 79 12,0 M 10 x 30 7/16" x 1.1/2"
SFH 40 VA 3000 PSI 1.1/2" 200 61,1 7,5 69,9 94 13,5 M 12 x 35 1/2" x 1.1/2"
SFH 50 VA 3000 PSI 2" 200 72,2 9,0 77,8 102 13,5 M 12 x 35 1/2" x 1.1/2"
SFH 60 VA 3000 PSI 2.1/2" 160 84,9 9,0 88,9 114 13,5 M 12 x 40 1/2" x 1.1/2"
SFH 75 VA 3000 PSI 3" 160 102,4 9,0 106,4 135 17,0 M 16 x 50 5/8" x 2"
SFH6 13 VA 6000 PSI 1/2" 400 32,5 7,2 40,5 56 8,7 M 8 x 30 5/16" x 1.1/4"
SFH6 20 VA 6000 PSI 3/4" 400 42,1 8,3 50,8 71 10,7 M 10 x 35 3/8" x 1.1/2"
SFH6 25 VA 6000 PSI 1" 400 48,4 9,0 57,2 81 13,0 M 12 x 45 -
SFH6 32 VA 6000 PSI 1.1/4" 400 54,8 9,8 66,7 95 14,7 M 14 x 45 -
SFH6 40 VA 6000 PSI 1.1/2" 400 64,3 12,1 79,4 113 17,0 M 16 x 55 5/8" x 2"
SFH6 50 VA 6000 PSI 2" 400 80,2 12,1 96,8 133 21,0 M 20 x 70 3/4" x 2.1/2"

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.