SFS

SAE flange seal SFS



Properties

Colour yellow + black
Media Mineral oils
Material (2) Polyurethane 95 Shore A, 1) Polyurethane 57 Shore A
Installation on SAE flange 3000 and 6000 PSI
Operating pressure to 420 bar (6000PSI)

Description

Good extrusion resistance.
Long service life.
Easy assembly because the seal and flange adhere to each other.

Article Table

Product Name Flange size D mm e mm B mm
Product Name Flange size D mm e mm B mm
SFS - 08 1/2" 25,4 2,85 4,2
SFS - 12 3/4" 31,8 2,85 4,2
SFS - 16 1" 39,7 2,85 4,2
SFS - 20 1.1/4" 44,5 2,85 4,2
SFS - 24 1.1/2" 53,8 2,85 4,2
SFS - 32 2" 63,4 2,85 4,2
SFS - 40 2.1/2" 76,2 2,85 4,2
SFS - 48 3" 91,9 2,85 4,2

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.