SFS (3000 PSI)

SAE stub end



Properties

Design SAE stub end
Construction straight
Scope of supply short stub end only
Standard ISO 6162, SAE J 518 C
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size Pipe A mm Ø B mm C mm D mm E mm F mm G mm L mm M metr. M unc
Product Name PB 10.9 bar Size Pipe A mm Ø B mm C mm D mm E mm F mm G mm L mm M metr. M unc
SFS 3001 S 16 350 1/2" 16 x 2 16,0 12,0 38,1 54 17,5 45,6 41 8,5 M 8 x 30 5/16" x 1.1/4"
SFS 3001-21.3 350 1/2" 21.3 x 4.7 22,0 15,5 38,1 54 17,5 45,6 41 8,5 M 8 x 30 5/16" x 1.1/4"
SFS 3002-25 350 3/4" 25 x 3 27,0 18,9 47,6 65 22,2 51,8 50 10,5 M 10 x 30 3/8" x 1.1/4"
SFS 3002-26.9 350 3/4" 26.9 x 3.9 27,0 18,9 47,6 65 22,2 51,8 50 10,5 M 10 x 30 3/8" x 1.1/4"
SFS 3003-28 315 1" 28 x 3 28,0 22,0 52,4 70 26,2 58,4 50 10,5 M 10 x 35 3/8" x 1.1/4"
SFS 3003-30 315 1" 30 x 4 30,0 22,0 52,4 70 26,2 58,4 50 10,5 M 10 x 35 3/8" x 1.1/4"
SFS 3003-33.7 315 1" 33.7 x 4.5 35,0 24,7 52,4 70 26,2 58,4 50 10,5 M 10 x 35 3/8" x 1.1/4"
SFS 3003-38 315 1" 38 x 5 38,0 28,0 52,4 70 26,2 58,4 50 10,5 M 10 x 35 3/8" x 1.1/4"
SFS 3004-38 250 1.1/4" 38 x 5 38,0 28,0 58,7 79 30,2 72,6 55 *1 *2 7/16" x 1.1/2"
SFS 3004-42.4 250 1.1/4" 42.4 x 6.3 43,0 29,7 58,7 79 30,2 72,6 55 *1 *2 7/16" x 1.1/2"
SFS 3005-38 200 1.1/2" 38 x 4 38,0 30,0 69,9 94 35,7 82,2 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3005-42 200 1.1/2" 42 x 5 42,0 32,0 69,9 94 35,7 82,2 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3005-45 200 1.1/2" 45 x 5 45,0 35,0 69,9 94 35,7 82,2 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3005-48.3 200 1.1/2" 48.3 x 7.1 49,0 34,0 69,9 94 35,7 82,2 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3006-55 200 2" 55 x 5 55,0 45,0 77,8 102 42,9 96,4 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3006-60.3 200 2" 60.3 x 8 60,3 44,0 77,8 102 42,9 96,4 57 13,5 M 12 x 35 1/2" x 1.1/2"
SFS 3007-65 160 2.1/2" 65 x 6 65,0 53,0 88,9 114 50,8 108,2 58 13,5 M 12 x 40 1/2" x 1.3/4"
SFS 3007-70 160 2.1/2" 70 x 7.5 70,0 55,0 88,9 114 50,8 108,2 58 13,5 M 12 x 40 1/2" x 1.3/4"
SFS 3007-76.1 160 2.1/2" 76.1 x 7.1 74,0 62,0 88,9 114 50,8 108,2 58 13,5 M 12 x 40 1/2" x 1.3/4"
SFS 3008-80 138 3" 80 x 6 80,0 68,0 106,4 135 61,9 130,6 60 16,7 M 16 x 45 5/8" x 2"
SFS 3008-88.9 138 3" 88.9 x 8 90,0 73,0 106,4 135 61,9 130,6 60 16,7 M 16 x 45 5/8" x 2"
SFS 3009-100 35 3.1/2" 100 x 6 100,0 88,0 120,7 152 69,9 139,0 60 17,0 M 16 x 45 5/8" x 2"
SFS 3009-88.9 35 3.1/2" 88.9 x 8 90,0 73,0 120,7 152 69,9 139,0 60 17,0 M 16 x 45 5/8" x 2"
SFS 3010-110 35 4" 110 x 6 110,0 98,0 130,2 162 77,8 152,0 60 17,0 M 16 x 50 5/8" x 2"
SFS 3010-114.3 35 4" 114.3 x 8.8 115,0 96,7 130,2 162 77,8 152,0 60 17,0 M 16 x 50 5/8" x 2"
SFS 3011-133 35 5" 133 x 6.5 133,0 120,0 152,4 184 92,1 180,0 60 17,0 M 16 x 50 5/8" x 2"
SFS 3011-139.7 35 5" 139.7 x 10 140,0 120,0 152,4 184 92,1 180,0 60 17,0 M 16 x 50 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.