SG 100 RI EP

Suction hose


Properties

Outer layer EPDM
Insert two high tensile textile inserts and one spring steel spiral
Application Hose for suction and return lines with restricted installation space
Colour black
Inner layer EPDM
Media Water

Hints

Unsuitable for use with swage fittings.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm
SG 120 RI EP 19 12 3/4" 19,0 28 10,0 30 -0,9 40
SG 125 RI EP 25 16 1" 25,0 35 10,0 30 -0,9 60
SG 132 RI EP 31 20 1.1/4" 32,0 42 10,0 30 -0,9 85
SG 140 RI EP 38 24 1.1/2" 38,0 48 10,0 30 -0,9 110
SG 150 RI EP 51 32 2" 50,8 62 8,0 24 -0,9 150
SG 157 RI EP 60 36 2.1/4" 57,0 69 10,0 30 -0,9 143
SG 163 RI EP 63 38 2.1/2" 63,5 77 10,0 30 -0,9 159
SG 176 RI EP 76 48 3" 76,2 90 10,0 30 -0,9 191
SG 190 RI EP 90 56 3.1/2" 90,0 104 10,0 30 -0,9 225
SG 1102 RI EP 100 102 4" 101,6 116 8,0 24 -0,9 310
SG 1127 RI EP 125 96 5" 127,0 145 8,0 24 -0,9 500
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.