SGB 100

Suction hose

  • Image_1 Image_1

Properties

Application area Hose for suction and return lines with restricted installation space
Colour black
Inner layer oil resistant synthetic rubber
Insert two high tensile textile inserts and one embedded spring steel spiral
Media Mineral oil, Water-glycol emulsions, Water-oil emulsions
Outer layer synthetic rubber with high ozone, abrasion, and weather resistance
Standard similar to SAE 100 R4
Temp. max. 100 °C
Temp. min. -40 °C

Hints

Die empfohlene Fließgeschwindigkeit für Medien in Saugschläuchen beträgt maximal 1m/s.

Article Table

Product Name Innen-Ø nom. mm DN* Vakuum bar Außen-Ø mm Zoll Berstdruck bar Size Biegeradius min. mm
Product Name Innen-Ø nom. mm DN* Vakuum bar Außen-Ø mm Zoll Berstdruck bar Size Biegeradius min. mm
SGB120 19.0 mm 19 -0.8 bar 29 mm 3/4" 63 bar 12 40 mm
SGB125 25.4 mm 25 -0.8 bar 35 mm 1" 51 bar 16 55 mm
SGB132 32.0 mm 31 -0.8 bar 42 mm 1.1/4" 42 bar 20 70 mm
SGB140 38.0 mm 38 -0.8 bar 50 mm 1.1/2" 30 bar 24 80 mm
SGB145 45.0 mm 45 -0.8 bar 56 mm 1.3/4" 30 bar 28 100 mm
SGB150 50.8 mm 51 -0.8 bar 62 mm 2" 30 bar 32 100 mm
SGB160 60.0 mm 60 -0.8 bar 72 mm 2.3/8" 30 bar 40 145 mm
SGB163 63.5 mm 63 -0.8 bar 75 mm 2.1/2" 30 bar 40 170 mm
SGB170 70.0 mm 70 -0.8 bar 82 mm 2.3/4" 30 bar 44 210 mm
SGB176 76.2 mm 76 -0.8 bar 88 mm 3" 30 bar 48 225 mm
SGB180 80.0 mm 80 -0.8 bar 94 mm 3.1/8" 30 bar 50 240 mm
SGB1102 102.0 mm 100 -0.8 bar 116 mm 4" 30 bar 64 305 mm
SGB1110 110.0 mm 110 -0.6 bar 125 mm 4.3/8" 30 bar 69 335 mm
SGB1127 127.0 mm 125 -0.6 bar 145 mm 5" 30 bar 80 460 mm
SGB1152 152.0 mm 150 -0.6 bar 170 mm 6" 30 bar 96 580 mm
DN = Nominal diameter, nominal width, Burst pressure: Safety factor = 3:1

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.