SGD 100

Suction and pressure hose

  • Image_1 Image_1

Properties

Application area Low pressure suction and pressure systems
Colour black
Inner layer oil resistant synthetic rubber
Insert highly tear-resistant synthetic textile insert and steel wire spiral
Media Mineral oil
Water-oil emulsions
Outer layer synthetic rubber with high ozone, abrasion, and weather resistance
Temp. max. 100 °C
Temp. min. -40 °C

Article Table

Product Name Internal Ø nom. mm DN* Vacuum bar Operating pressure bar External Ø mm Inches Burst pressure bar Size Min. bending radius mm
Product Name Internal Ø nom. mm DN* Vacuum bar Operating pressure bar External Ø mm Inches Burst pressure bar Size Min. bending radius mm
SGD 125 25.4 25 0.9 25 40 1" 75 16 152
SGD 132 32.0 31 0.9 25 46 1.1/4" 75 20 192
SGD 140 38.0 38 0.9 25 54 1.1/2" 75 24 228
SGD 150 50.8 51 0.9 25 67 2" 75 32 305
SGD 163 63.5 63 0.9 25 82 2.1/2" 75 40 381
SGD 176 76.2 76 0.9 25 96 3" 75 48 457
SGD 1102 101.6 100 0.9 25 125 4" 75 64 610
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.