SI 200

Fuel hose with braiding

  • Image_1 Image_1

Properties

Application area Low pressure hose for fuel lines
Colour black
Inner layer oil resistant synthetic rubber
Insert one braided textile insert
Media Petrol fuels
Crude oil
Lubricating oil
Lubricating oil
Outer layer none
Standard DIN 73379
Temp. max. 80 °C
Temp. min. -35 °C

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Unit Roll length m Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Unit Roll length m Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
SI 202 7.0 3.2 2 30 Reel 20 20 Yes 3/32" 60 1 20
SI 203 9.5 4.5 3 30 Reel 20 20 Yes 1/8" 60 2 25
SI 204 10.5 5.5 4 30 Reel 20 20 Yes 3/16" 60 3 25
SI 206 12.5 7.5 6 25 Reel 20 15 Yes 1/4" 50 4 30
SI 208 15.0 9.5 8 25 Reel 20 15 Yes 5/16" 50 5 40
SI 210 17.0 11.5 10 25 Reel 20 15 Yes 3/8" 50 6 45
SI 213 22.0 15.0 12 20 Reel 20 12 Yes 1/2" 40 8 50
SI 216 26.0 18.0 16 20 Reel 20 12 Yes 5/8" 38 10 70
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.