SI 200 RME

Fuel hose

  • Image_1 Image_1

Properties

Application area Low pressure hose for fuel lines
Besondere Merkmale antistatic inner and outer rubber
Colour black
Inner layer NBR
Insert spiral synthetic textile threads
Media Bio-diesel (B20), Crude oil, Petrol fuels, max. Temp. für Kraftstoffe max. +70 °C
Outer layer BNBR/EPDM, smooth
Temp. max. 100 °C
Temp. min. -30 °C

Article Table

Product Name Innen-Ø nom. mm DN* Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Zoll Berstdruck bar Size Biegeradius min. mm
Product Name Innen-Ø nom. mm DN* Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Zoll Berstdruck bar Size Biegeradius min. mm
SI206RME 6.0 mm 6 Reel 100 10.0 bar Yes 13 mm 1/4" 30 bar 4 55 mm
SI208RME 7.5 mm 8 Reel 100 10.0 bar Yes 14 mm 5/16" 30 bar 5 65 mm
SI210RME 10.0 mm 10 Reel 100 10.0 bar Yes 16 mm 3/8" 30 bar 6 75 mm
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.