SKF HL / SKF HS

Screw coupling (fixed)


Properties

Connection 1 metric cylindrical outer thread
Sealing form 1 24° inner cone
Application General application, e.g. in industry, construction machinery, agricultural technology etc.
Surface electro galvanised
Material Steel
Residual pressure: Coupling under residual pressure is possible

Description

Screw couplings are designed for high pressures and pressure pulses.
It is recommended to combine only couplings same manufacturer.

Hints

Other pressure and temperature figures available on request.

Article Table

Product Name Size DN* Series for external pipe Ø mm Connecting thread Coupling thread Operating pressure bar Mineral oil temp. min. °C Mineral oil temp. max. °C SF coup.*
Product Name Size DN* Series for external pipe Ø mm Connecting thread Coupling thread Operating pressure bar Mineral oil temp. min. °C Mineral oil temp. max. °C SF coup.*
SKF 04 HL 1 1 4 L 6 M 12x1,5 Rd. 24 x 2 315,0 -25 100 4
SKF 06 HL 1 1 6 L 8 M 14x1,5 Rd. 24 x 2 315,0 -30 100 4
SKF 06 HL 2 2 6 L 8 M 14x1,5 Rd. 28 x 2 315,0 -30 100 4
SKF 06 HL 3 3 6 L 8 M 14x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 08 HL 2 2 8 L 10 M 16x1,5 Rd. 28 x 2 325,0 -30 100 4
SKF 08 HL 3 3 8 L 10 M 16x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 10 HL 3 3 10 L 12 M 18x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 10 HL 4 4 10 L 12 M 18x1,5 Rd. 42 x 2 250,0 -30 100 4
SKF 13 HL 3 3 12 L 15 M 22x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 13 HL 4 4 12 L 15 M 22x1,5 Rd. 42 x 2 250,0 -30 100 4
SKF 16 HL 3 3 16 L 18 M 26x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 16 HL 4 4 16 L 18 M 26x1,5 Rd. 42 x 2 250,0 -30 100 4
SKF 16 HL 5 5 16 L 18 M 26x1,5 Rd. 48 x 3 250,0 -30 100 4
SKF 20 HL 5 5 19 L 22 M 30x2 Rd. 48 x 3 250,0 -30 100 4
SKF 25 HL 5 5 25 L 28 M 36x2 Rd. 48 x 3 250,0 -30 100 4
SKF 32 HL 5 5 31 L 35 M 45x2 Rd. 48 x 3 250,0 -30 100 4
SKF 32 HL 6 6 31 L 35 M 45x2 Rd. 70 x 3 160,0 -25 100 4
SKF 40 HL 6 6 38 L 42 M 52x2 Rd. 70 x 3 160,0 -25 100 4
SKF 04 HS 1 1 4 S 8 M 16x1,5 Rd. 24 x 2 400,0 -25 100 4
SKF 06 HS 1 1 6 S 10 M 18x1,5 Rd. 24 x 2 450,0 -25 100 4
SKF 06 HS 2 2 6 S 10 M 18x1,5 Rd. 28 x 2 325,0 -30 100 4
SKF 06 HS 3 3 6 S 10 M 18x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 08 HS 2 2 8 S 12 M 20x1,5 Rd. 28 x 2 325,0 -30 100 4
SKF 08 HS 3 3 8 S 12 M 20x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 10 HS 3 3 10 S 14 M 22x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 10 HS 4 4 10 S 14 M 22x1,5 Rd. 42 x 2 250,0 -30 100 4
SKF 13 HS 3 3 12 S 16 M 24x1,5 Rd. 36 x 2 300,0 -30 100 4
SKF 13 HS 4 4 12 S 16 M 24x1,5 Rd. 42 x 2 250,0 -30 100 4
SKF 16 HS 3 3 16 S 20 M 30x2 Rd. 36 x 2 300,0 -30 100 4
SKF 16 HS 4 4 16 S 20 M 30x2 Rd. 42 x 2 250,0 -30 100 4
SKF 16 HS 5 5 16 S 20 M 30x2 Rd. 48 x 3 250,0 -30 100 4
SKF 20 HS 5 5 19 S 25 M 36x2 Rd. 48 x 3 250,0 -30 100 4
SKF 25 HS 5 5 25 S 30 M 42x2 Rd. 48 x 3 250,0 -30 100 4
SKF 25 HS 6 6 25 S 30 M 42x2 Rd. 70 x 3 250,0 -30 100 4
SKF 32 HS 6 6 31 S 38 M 52x2 Rd. 70 x 3 250,0 -30 100 4
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.
It is recommended to combine only couplings same manufacturer.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.