SKF IM

Screw coupling (fixed)

  • Image_1 Image_1

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 metric cylindrical inner thread
Material Steel
Residual pressure Coupling under residual pressure is possible
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised

Description

Screw couplings are designed for high pressures and pressure pulses.
It is recommended to combine only couplings same manufacturer.

Article Table

Product Name DN* Mineral oil temp. min. °C SF coup.* Size Operating pressure bar Mineral oil temp. max. °C Coupling thread Connecting thread
Product Name DN* Mineral oil temp. min. °C SF coup.* Size Operating pressure bar Mineral oil temp. max. °C Coupling thread Connecting thread
SKF 06 IM 1 6 -25 4 1 400.0 100 Rd. 24 x 2 M 14x1,5
SKF 08 IM 2 8 -30 4 2 325.0 100 Rd. 28 x 2 M 16x1,5
SKF 10 IM 3 10 -30 4 3 300.0 100 Rd. 36 x 2 M 18x1,5
SKF 13 IM 3 12 -30 4 3 300.0 100 Rd. 36 x 2 M 22x1,5
SKF 13 IM 4 12 -30 4 4 250.0 100 Rd. 42 x 2 M 22x1,5
SKF 20 IM 5 19 -25 4 5 250.0 125 Rd. 48 x 3 M 30x1,5
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.