SKF IR SN75

Screw coupling (fixed)


Properties

Connection 1 BSP cylindrical internal threads
Design Snap-tite series 75
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Application Offshore applications, oilfields, tools etc.
Surface electro galvanised
Material Steel
Residual pressure: Coupling under residual pressure is possible

Description

Screw couplings are designed for high pressures and pressure pulses.

Article Table

Product Name DN* Connecting thread Coupling thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Connecting thread Coupling thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
SKF 20 IR SN75 19 G 3/4" -14 - 345,0 4 -40 90
SKF 25 IR SN75 25 G 1" -11 - 345,0 4 -40 90
SKF 32 IR SN75 31 G 1.1/4" -11 - 345,0 3 -40 90
SKF 40 IR SN75 38 G 1.1/2" -11 - 345,0 3 -40 90
SKF 50 IR SN75 51 G 2" -11 - 345,0 3 -40 90
SKF 75 IR SN75 76 G 3" -11 - 207,0 2 -40 90
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.