SKM HL 3 UDK

Push-in coupling female

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Additional feature for coupling under residual pressure
Connection 1 metric cylindrical outer thread
Material Steel
Sealing form 1 24° inner cone
Surface electro galvanised

Article Table

Product Name D2 mm DN* Mineral oil temp. min. °C Size Operating pressure bar Connecting thread D1 mm L mm SF coup.* AF mm for external pipe Ø mm Mineral oil temp. max. °C Series
Product Name D2 mm DN* Mineral oil temp. min. °C Size Operating pressure bar Connecting thread D1 mm L mm SF coup.* AF mm for external pipe Ø mm Mineral oil temp. max. °C Series
SKM 10 HL 3 UDK 23.8 10 25 3 225.0 M 18x1,5 38 70 4 30 12 125 L
SKM 13 HL 3 UDK 23.8 12 25 3 225.0 M 22x1,5 38 71 4 30 15 125 L
BD = Working pressure
SF gek. = Safety factor coupled
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.