SKM HL FS

Plug-in coupling sleeve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 metric cylindrical outer thread
Material Steel
Sealing form 1 24° inner cone
Standard ISO 16028
Surface electro galvanised
compatible with Stucchi

Description

Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.

Hints

With standard threaded connections in determining the operating pressure of the maximum rated pressure is taken into account.
Interchangeable with couplings to ISO 16028.

Article Table

Product Name DN* Mineral oil temp. min. °C Size Operating pressure bar SF coup.* for external pipe Ø mm Mineral oil temp. max. °C Series Connecting thread
Product Name DN* Mineral oil temp. min. °C Size Operating pressure bar SF coup.* for external pipe Ø mm Mineral oil temp. max. °C Series Connecting thread
SKM 08 HL 2 FS 8 -20 2 350.0 4 10 100 L M 16x1,5
SKM 10 HL 2 FS 10 -20 2 350.0 4 12 100 L M 18x1,5
SKM 10 HL 3 FS 10 -20 3 350.0 4 12 100 L M 18x1,5
SKM 13 HL 2 FS 12 -20 2 350.0 4 15 100 L M 22x1,5
SKM 13 HL 3 FS 12 -20 3 350.0 4 15 100 L M 22x1,5
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.