SKM IM

Plug-in coupling sleeve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 metric cylindrical inner thread
Material Steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard complies with ISO 7241 A series
Surface electro galvanised

Description

The sliding sleeve can be fitted in a bulkhead wall with snap rings and then acts as a quick release coupling.
The double acting sliding sleeve provides a push/pull function when coupling.
Plug-in couplings allow quick coupling.

Article Table

Product Name DN* Mineral oil temp. min. °C SF coup.* Size Operating pressure bar Mineral oil temp. max. °C Connecting thread
Product Name DN* Mineral oil temp. min. °C SF coup.* Size Operating pressure bar Mineral oil temp. max. °C Connecting thread
SKM 04 IM 1 4 -25 4 1 300.0 100 M 12x1,5
SKM 06 IM 1 6 -25 4 1 300.0 100 M 14x1,5
SKM 08 IM 2 8 -30 4 2 250.0 100 M 16x1,5
SKM 08 IM 3 8 -25 4 3 225.0 125 M 16x1,5
SKM 10 IM 2 10 -30 4 2 250.0 100 M 18x1,5
SKM 10 IM 3 10 -30 4 3 225.0 100 M 18x1,5
SKM 10 IM 4 10 -25 4 4 225.0 125 M 18x1,5
SKM 13 IM 3 12 -30 4 3 225.0 100 M 22x1,5
SKM 13 IM 4 12 -30 4 4 225.0 100 M 22x1,5
SKM 20 IM 5 19 -25 4 5 225.0 125 M 30x1,5
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.