SKM IM U

Plug-in coupling sleeve

  • Image_1 Image_1

Properties

Application area Automotive engineering (UNIMOG)
Connection 1 metric cylindrical inner thread
Material Steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard complies with ISO 7241 A series
Surface electro galvanised

Description

The double acting sliding sleeve provides a push/pull function when coupling.
Plug-in couplings allow quick coupling.

Article Table

Product Name DN* Mineral oil temp. min. °C SF coup.* Vegetable oil temp. min. °C Size Operating pressure bar Mineral oil temp. max. °C Vegetable oil temp. max. °C Connecting thread
Product Name DN* Mineral oil temp. min. °C SF coup.* Vegetable oil temp. min. °C Size Operating pressure bar Mineral oil temp. max. °C Vegetable oil temp. max. °C Connecting thread
SKM 13 IM 3 U 12 -30 4 -15 3 250.0 100 80 M 22x1,5
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.