SKM IN SN H

Plug-in coupling sleeve

  • Image_1 Image_1

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 NPT internal thread
Design Snap-tite series H
Material Steel
Sealing form 1 thread seal
Surface electro galvanised

Description

Plug-in couplings allow quick coupling.

Article Table

Product Name DN* Connecting thread Mineral oil temp. min. °C SF coup.* Operating pressure bar Mineral oil temp. max. °C
Product Name DN* Connecting thread Mineral oil temp. min. °C SF coup.* Operating pressure bar Mineral oil temp. max. °C
SKM 06 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 6 NPT 1/4" -18 -40 2 450.0 90
SKM 10 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 10 NPT 3/8" -18 -40 2 310.0 90
SKM 13 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 12 NPT 1/2" -14 -40 2 280.0 90
SKM 20 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 19 NPT 3/4" -14 -40 2 245.0 90
SKM 25 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 25 NPT 1" -11,5 -40 2 140.0 90
SKM 32 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 31 NPT 1.1/4" -11,5 -40 2 125.0 90
SKM 40 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 38 NPT 1.1/2" -11,5 -40 2 105.0 90
SKM 65 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 65 NPT 2.1/2" -8 -40 2 70.0 90
SKM 75 IN SN H Plug-in coupling sleeve; Steel; electro galvanised 76 NPT 3" -8 -40 2 55.0 90
DN = Nominal diameter, nominal width
SF coup. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.