SKM IR

Plug-in coupling sleeve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 BSP cylindrical internal threads
Material Steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard ISO 7241 series A
Surface electro galvanised

Description

The sliding sleeve can be fitted in a bulkhead wall with snap rings and then acts as a quick release coupling.
The double acting sliding sleeve provides a push/pull function when coupling.
Plug-in couplings allow quick coupling.

Article Table

Product Name DN* Connecting thread Mineral oil temp. min. °C SF coup.* Operating pressure bar Size Mineral oil temp. max. °C Weight kg
Product Name DN* Connecting thread Mineral oil temp. min. °C SF coup.* Operating pressure bar Size Mineral oil temp. max. °C Weight kg
SKM 04 IR 1 Plug-in coupling sleeve; Steel; electro galvanised 4 G 1/8" -28 -25 4 300.0 1 100 0.118
SKM 06 IR 1 Plug-in coupling sleeve; Steel; electro galvanised 6 G 1/4" -19 -30 4 250.0 1 100 0.146
SKM 10 IR 2 Plug-in coupling sleeve; Steel; electro galvanised 10 G 3/8" -19 -30 4 250.0 2 100 0.184
SKM 10 IR 3 Plug-in coupling sleeve; Steel; electro galvanised 10 G 3/8" -19 -30 4 225.0 3 100 0.330
SKM 13 IR 3 Plug-in coupling sleeve; Steel; electro galvanised 12 G 1/2" -14 -30 4 225.0 3 100 0.300
SKM 20 IR 4 Plug-in coupling sleeve; Steel; electro galvanised 19 G 3/4" -14 -30 4 225.0 4 100 0.590
SKM 20 IR 5 Plug-in coupling sleeve; Steel; electro galvanised 19 G 3/4" -14 -30 4 225.0 5 100 0.876
SKM 25 IR 5 Plug-in coupling sleeve; Steel; electro galvanised 25 G 1" -11 -30 4 225.0 5 100 0.834
DN = Nominal diameter, nominal width
SF coup. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.