SKM IR SN72 VA

Plug-in coupling sleeve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 BSP cylindrical internal threads
Design Snap-tite series 72
Material Stainless steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard ISO 7241-1 Series B

Description

Plug-in couplings allow quick coupling.

Article Table

Product Name DN* mm Mineral oil temp. min. °C SF coup.* Operating pressure bar AF mm Ø D1 mm Mineral oil temp. max. °C Connecting thread
Product Name DN* mm Mineral oil temp. min. °C SF coup.* Operating pressure bar AF mm Ø D1 mm Mineral oil temp. max. °C Connecting thread
SKM 04 IR SN72 VA 4 23 -25 4 280.0 17 23 200 G 1/8" -28
SKM 06 IR SN72 VA 6 28 -25 4 380.0 19 28 200 G 1/4" -19
SKM 10 IR SN72 VA 10 35 -25 4 260.0 22 35 200 G 3/8" -19
SKM 13 IR SN72 VA 12 44 -25 4 260.0 27 44 200 G 1/2" -14
SKM 20 IR SN72 VA 19 52 -25 4 210.0 34 52 200 G 3/4" -14
SKM 25 IR SN72 VA 25 60 -25 4 210.0 41 60 200 G 1" -11
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.