SKMS HL / SKMS HS

Plug-in coupling sleeve (bulkhead connection)


Properties

Connection 1 metric cylindrical outer thread
Design Coupling with bulkhead connection
Sealing form 1 24° inner cone
Application General application, e.g. in industry, construction machinery, agricultural technology etc.
Standard complies with ISO 7241
Surface electro galvanised
Material Steel

Description

The sliding sleeve can be fitted in a bulkhead wall with snap rings and then acts as a quick release coupling.
The double acting sliding sleeve provides a push/pull function when coupling.
Plug-in couplings allow quick coupling.

Hints

Other pressure and temperature figures available on request.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Size Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Series for external pipe Ø mm Connecting thread Size Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
SKMS 04 HL 2 4 L 6 M 12x1,5 2 300,0 4 -25 125
SKMS 06 HL 2 6 L 8 M 14x1,5 2 250,0 4 -30 100
SKMS 06 HL 3 6 L 8 M 14x1,5 3 225,0 4 -30 100
SKMS 08 HL 2 8 L 10 M 16x1,5 2 250,0 4 -30 100
SKMS 08 HL 3 8 L 10 M 16x1,5 3 225,0 4 -30 100
SKMS 10 HL 3 10 L 12 M 18x1,5 3 225,0 4 -30 100
SKMS 10 HL 4 10 L 12 M 18x1,5 4 225,0 4 -30 100
SKMS 13 HL 3 12 L 15 M 22x1,5 3 225,0 4 -30 100
SKMS 13 HL 4 12 L 15 M 22x1,5 4 225,0 4 -30 100
SKMS 16 HL 3 16 L 18 M 26x1,5 3 225,0 4 -30 100
SKMS 16 HL 4 16 L 18 M 26x1,5 4 225,0 4 -30 100
SKMS 16 HL 5 16 L 18 M 26x1,5 5 225,0 4 -30 100
SKMS 20 HL 4 19 L 22 M 30x2 4 225,0 4 -30 100
SKMS 20 HL 5 19 L 22 M 30x2 5 225,0 4 -30 100
SKMS 25 HL 5 25 L 28 M 36x2 5 225,0 4 -30 100
SKMS 04 HS 2 4 S 8 M 16x1,5 2 250,0 4 -30 100
SKMS 06 HS 1 6 S 10 M 18x1,5 1 300,0 4 -25 100
SKMS 06 HS 2 6 S 10 M 18x1,5 2 250,0 4 -30 100
SKMS 06 HS 3 6 S 10 M 18x1,5 3 225,0 4 -30 100
SKMS 08 HS 2 8 S 12 M 20x1,5 2 250,0 4 -30 100
SKMS 08 HS 3 8 S 12 M 20x1,5 3 225,0 4 -30 100
SKMS 10 HS 3 10 S 14 M 22x1,5 3 225,0 4 -30 100
SKMS 10 HS 4 10 S 14 M 22x1,5 4 225,0 4 -25 125
SKMS 13 HS 3 12 S 16 M 24x1,5 3 225,0 4 -30 100
SKMS 13 HS 4 12 S 16 M 24x1,5 4 225,0 4 -30 100
SKMS 16 HS 3 16 S 20 M 30x2 3 225,0 4 -25 100
SKMS 16 HS 4 16 S 20 M 30x2 4 225,0 4 -30 100
SKMS 16 HS 5 16 S 20 M 30x2 5 225,0 4 -30 100
SKMS 20 HS 5 19 S 25 M 36x2 5 225,0 4 -30 100
SKMS 25 HS 5 25 S 30 M 42x2 5 225,0 4 -30 100
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.