SK SF GFS

2-way ball valve, in forged design

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Connection 1 SAE flange
Connection 2 SAE counter flange
Contact travel 0°; 90°
Material POM ball seal, NBR O-ring, Forged steel housing, Steel ball and operating shaft
Sealing form 1 + 2 flat seal with SF O-ring
Surface burnished
Temp. max. 80 °C
Temp. min. -10 °C

Hints

Bitte die Bedienungsanleitung für Kugelhähne beachten.
Bitte die zul.
Druckangaben der Verbindungselemente beachten.

Article Table

Product Name SF* DN* Druck PN Flanschgröße LW mm Druckreihe SW mm
Product Name SF* DN* Druck PN Flanschgröße LW mm Druckreihe SW mm
SKSF32GFS 1.5 31 250 bar 1.1/4" 32.0 mm 3000 PSI 17 mm
SKSF40GFS 1.5 38 200 bar 1.1/2" 38.0 mm 3000 PSI 17 mm
SKSF50GFS 1.5 51 200 bar 2" 47.5 mm 3000 PSI 17 mm
SKSF632GFS 1.5 31 400 bar 1.1/4" 32.0 mm 6000 PSI 17 mm
SKSF640GFS 1.5 38 400 bar 1.1/2" 38.0 mm 6000 PSI 17 mm
SKSF650GFS 1.5 51 400 bar 2" 47.5 mm 6000 PSI 17 mm
DN = Nominal diameter, nominal width, LW = Clearance, PN = Nominal pressure PB = Max. operating pressure, AF = Width across flats, SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.