SKS HL UDK / SKS HS UDK

Plug-in coupling connector


Properties

Connection 1 metric cylindrical outer thread
Sealing form 1 24° inner cone
Surface electro galvanised
Material Steel
Residual pressure: Coupling under residual pressure is possible

Description

Plug-in couplings allow quick coupling.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Size Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Series for external pipe Ø mm Connecting thread Size Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
SKS 06 HL 3 UDK 6 L 8 M 14x1,5 3 225,0 4 -25 125
SKS 08 HL 3 UDK 8 L 10 M 16x1,5 3 225,0 4 -25 125
SKS 10 HL 3 UDK 10 L 12 M 18x1,5 3 225,0 4 -25 125
SKS 13 HL 3 UDK 12 L 15 M 22x1,5 3 225,0 4 -25 125
SKS 16 HL 3 UDK 16 L 18 M 26x1,5 3 225,0 4 -25 125
SKS 06 HS 3 UDK 6 S 10 M 18x1,5 3 225,0 4 -25 125
SKS 08 HS 3 UDK 8 S 12 M 20x1,5 3 225,0 4 -25 125
SKS 10 HS 3 UDK 10 S 14 M 22x1,5 3 225,0 4 -25 125
SKS 13 HS 3 UDK 12 S 16 M 24x1,5 3 225,0 4 -25 125
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.