SKS IN HC

Plug-in coupling connector

  • Image_1 Image_1

Properties

Application area Emergency tools, clamping tools, presses etc.
Connection 1 NPT internal thread
Material Steel
Scope of supply with dust protection
Sealing form 1 thread seal
Surface electro galvanised

Description

Coupling and uncoupling with minimal drips.
Plug-in coupling for quick coupling in the extreme pressure range.

Hints

The connector may not be placed under load when uncoupled.

Article Table

Product Name DN* Mineral oil temp. min. °C Operating pressure bar SF coup.* Mineral oil temp. max. °C L mm Connecting thread
Product Name DN* Mineral oil temp. min. °C Operating pressure bar SF coup.* Mineral oil temp. max. °C L mm Connecting thread
SKS 04 IN HC 5 -30 1000.0 2.5 100 33.3 NPT 1/8" -27
SKS 06 IN HC 6 -30 1000.0 2.5 100 35.7 NPT 1/4" -18
SKS 10 IN HC 10 -30 1000.0 2.5 100 37.0 NPT 3/8" -18
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.