SKS IR FS

Plug-in coupling connector

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 BSP cylindrical internal threads
Design flat sealing
Material Steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard ISO 16028
Surface electro galvanised
compatible with Stucchi

Description

Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.

Hints

Austauschbar mit Kupplungen nach ISO 16028.

Article Table

Product Name DN* Temp. Mineralöl min. °C SF gek.* Baugröße Betriebsdruck bar Temp. Mineralöl max. °C Anschlussgewinde
Product Name DN* Temp. Mineralöl min. °C SF gek.* Baugröße Betriebsdruck bar Temp. Mineralöl max. °C Anschlussgewinde
SKS06IR1FS 6 -30 °C 4 1 400.0 bar 100 °C G 1/4" -19
SKS10IR2FS 10 -30 °C 4 2 350.0 bar 100 °C G 3/8" -19
SKS13IR2FS 12 -30 °C 4 2 350.0 bar 100 °C G 1/2" -14
SKS13IR3FS 12 -30 °C 4 3 350.0 bar 100 °C G 1/2" -14
SKS20IR3FS 19 -30 °C 4 3 350.0 bar 100 °C G 3/4" -14
SKS20IR4FS 19 -30 °C 4 4 350.0 bar 100 °C G 3/4" -14
SKS25IR5FS 25 -30 °C 4 5 350.0 bar 100 °C G 1" -11
SKS32IR6FS 31 -20 °C 4 6 300.0 bar 100 °C G 1.1/4" -11
SKS40IR7FS 38 -20 °C 4 7 200.0 bar 100 °C G 1.1/2" -11
SKS50IR8FS 51 -20 °C 4 8 200.0 bar 100 °C G 2" -11
DN = Nominal diameter, nominal width, SF gek. = Safety factor coupled

Order hints

Andere Druck- und Temperaturwerte auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.