SKS IR F SN74

Plug-in coupling connector

  • Image_1 Image_1

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 BSP cylindrical internal threads
Design Snap-tite series 74
Material Steel
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised

Description

Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.

Article Table

Product Name DN* Mineral oil temp. min. °C SF coup.* Operating pressure bar Mineral oil temp. max. °C Connecting thread
Product Name DN* Mineral oil temp. min. °C SF coup.* Operating pressure bar Mineral oil temp. max. °C Connecting thread
SKS 10 IR F SN74 10 -40 4 250.0 90 G 3/8" -19
SKS 13 IR F SN74 12 -40 4 250.0 90 G 1/2" -14
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.