SKS IR FS UDK

Plug-in coupling plug

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Additional feature can be coupled with 250 bar residual pressure
Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Connection 1 BSP cylindrical internal threads
Design flat sealing
Material Steel
Residual pressure Coupling under pressure is possible. (only plug side)
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Standard ISO 16028
Surface electro galvanised
compatible with Stucchi

Article Table

Product Name DN* Mineral oil temp. min. °C Size Operating pressure bar Mineral oil temp. max. °C Connecting thread
Product Name DN* Mineral oil temp. min. °C Size Operating pressure bar Mineral oil temp. max. °C Connecting thread
SKS 06 IR 1 FS UDK 6 -25 1 400.0 100 G 1/4" -19
SKS 10 IR 2 FS UDK 10 -25 2 350.0 100 G 3/8" -19
SKS 13 IR 2 FS UDK 12 -25 2 350.0 100 G 1/2" -14
SKS 13 IR 3 FS UDK 12 -25 3 350.0 100 G 1/2" -14
SKS 13 IR 4 FS UDK 12 -25 4 350.0 100 G 1/2" -14
SKS 20 IR 3 FS UDK 19 -25 3 350.0 100 G 3/4" -14
SKS 20 IR 4 FS UDK 19 -25 4 350.0 100 G 3/4" -14
SKS 20 IR 5 FS UDK 19 -25 5 300.0 100 G 3/4" -14
SKS 25 IR 5 FS UDK 25 -25 5 300.0 100 G 1" -11
DN = Nominal diameter, nominal width
SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.