SKS IR HC

Plug-in coupling connector


Properties

Connection 1 BSP cylindrical internal threads
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Application Emergency tools, clamping tools, presses etc.
Scope of supply with dust protection
Surface electro galvanised
Material Steel

Description

Coupling and uncoupling with minimal drips.
Plug-in coupling for quick coupling in the extreme pressure range.

Hints

The connector may not be placed under load when uncoupled.

Article Table

Product Name DN* Connecting thread L mm Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Connecting thread L mm Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
SKS 04 IR HC 5 G 1/8" -28 33,3 1000,0 2,5 -30 100
SKS 06 IR HC 6 G 1/4" -19 38,0 1000,0 2,5 -30 100
SKS 10 IR HC 10 G 3/8" -19 39,5 1000,0 2,5 -30 100
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.