SKS IR SN71-3

Plug-in coupling connector


Properties

Connection 1 BSP cylindrical internal threads
Sealing form 1 for screw-in pins with shapes A, B and if necessary E
Application General application, e.g. in industry, construction machinery, agricultural technology etc.
Surface electro galvanised
Material Steel

Description

Used for high pressures and severe pressure pulses.
Single handed operation when coupling (if the counter piece is fitted securely).
Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.

Article Table

Product Name DN* Connecting thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Connecting thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
SKS 06 IR SN71-3 6 G 1/4" -19 690,0 2 -40 90
SKS 10 IR SN71-3 10 G 3/8" -19 690,0 2 -40 90
SKS 13 IR SN71-3 12 G 1/2" -14 690,0 2 -40 90
SKS 20 IR SN71-3 19 G 3/4" -14 520,0 2 -40 90
SKS 25 IR SN71-3 25 G 1" -11 520,0 2 -40 90
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.