SM

Rod seal SM

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Design Rod packing set
Installation in open installation spaces
Material (1) Thrust ring: laminated fabric-reinforced NBR
(2) Seal: NBR
(3) Support ring: acetal resin / PTBR
Max. operating pressure up to 700 bar
Media Mineral oil
Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

High resistance to extrusion.
Adjustable groove height not necessary.
Simple solution.

Article Table

Product Name d nom. mm D mm L mm
Product Name d nom. mm D mm L mm
SM 169 118-1AX 30.00 43.00 20.00
SM 177 137-1AX 35.00 45.00 25.59
SM 185 137-1AX 35.00 47.00 22.50
SM 196 137-1AX 35.00 50.00 22.50
SM 200 141-1AX 36.00 51.00 22.50
SM 204 157-1AX 40.00 52.00 22.50
SM 216 157-1AX 40.00 55.00 22.62
SM 236 157-1AX 40.00 60.00 30.00
SM 236 177-1AX 45.00 60.00 22.50
SM 248 196-1AX 50.00 63.00 20.00
SM 255 177-1AX 45.00 65.00 28.00
SM 255 196-1CX 50.00 65.00 22.50
SM 255 196-1AX 50.00 65.00 24.50
SM 262 200-1AX 50.80 66.67 24.90
SM 275 196-1BX 50.00 70.00 30.00
SM 275 216-2AX 55.00 70.00 22.50
SM 275 216-1AX 55.00 70.00 25.00
SM 279 220-1AX 56.00 71.00 25.00
SM 295 236-2AX 60.00 75.00 22.50
SM 295 236-1AX 60.00 75.00 25.00
SM 303 236-1AX 60.00 77.00 27.00
SM 314 236-1BX 60.00 80.00 32.00
SM 334 255-1AX 65.00 85.00 29.00
SM 334 275-1AX 70.00 85.00 22.50
SM 334 275-1BX 70.00 85.00 25.00
SM 354 275-1AX 70.00 90.00 30.00
SM 354 275-2AX 70.00 90.00 31.90
SM 374 295-2AX 75.00 95.00 28.00
SM 379 301-1AX 76.50 96.50 32.50
SM 393 314-1AX 80.00 100.00 30.00
SM 413 354-1AX 90.00 105.00 25.00
SM 433 354-1AX 90.00 110.00 30.00
SM 472 393-1AX 100.00 120.00 30.00
SM 511 433-1AX 110.00 130.00 32.50
SM 519 433-1AX 110.00 132.00 36.51
SM 570 492-1AX 125.00 145.00 29.62
SM 590 511-1AX 130.00 150.00 28.00
SM 669 590-1AX 150.00 170.00 28.00
SM 127 91181-1AX 300.00 325.00 35.00

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM, EPDM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.