Hydraulic-type lubricating nipple

  • Image_1 Image_1
  • Image_2 Image_2


Additional feature Lubricating nipple head diameter 6,5 mm
Connection 1 metric conical outer thread
Connection 2 Lubricating nipple
Construction straight
Design Hydraulic-type lubricating nipple
Material Brass
Sealing form 1 thread seal
Standard DIN 71412

Article Table

Product Name i mm AF mm G1 L mm
Product Name i mm AF mm G1 L mm
SNK M08-1.00 MG 5.5 9 M 8 x 1 K 15.0
SNK M08-1.25 MG 5.5 9 M 8 x 1.25 K 15.0
SNK M10-1.00 MG 5.5 11 M 10 x 1 K 15.0
SNK M12-1.50 MG 6.5 14 M 12 x 1.5 K 17.5


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.