SRDO V

Cutting ring with O-ring

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Cutting ring with O-ring
Material Steel
Standard DIN 3861
Surface electro galvanised

Article Table

Product Name L1 mm Rohr-Außen Ø mm Baureihe Ø d2 mm OR
Product Name L1 mm Rohr-Außen Ø mm Baureihe Ø d2 mm OR
SRDO06V 8.8 mm 6 mm L, S 6 mm 6 x 1
SRDO08V 8.8 mm 8 mm L, S 8 mm 8 x 1
SRDO10V 9.8 mm 10 mm L, S 10 mm 10 x 1
SRDO12V 9.8 mm 12 mm L, S 12 mm 12 x 1
SRDO14V 10.2 mm 14 mm S 14 mm 14 x 1
SRDO15V 10.2 mm 15 mm L 15 mm 15 x 1
SRDO16V 10.2 mm 16 mm S 16 mm 16 x 1
SRDO18V 10.2 mm 18 mm L 18 mm 18 x 1
SRDO20V 12.5 mm 20 mm S 20 mm 20 x 1
SRDO22V 11.5 mm 22 mm L 22 mm 22 x 1
SRDO25V 12.5 mm 25 mm S 25 mm 25 x 1
SRDO28V 11.5 mm 28 mm L 28 mm 28 x 1
SRDO30V 13.5 mm 30 mm S 30 mm 30 x 1
SRDO35V 13.5 mm 35 mm L 35 mm 35 x 1
SRDO38V 13.5 mm 38 mm S 38 mm 38 x 1
SRDO42V 13.5 mm 42 mm L 42 mm 42 x 1
Series: LL = Very light L = Light S = Heavy, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.