SRS 1-6 PA

Pipe clamp, light series



Properties

Construction type Inside of clamp with web
Series light
Standard DIN 3015-1
Material Polyamide 6

Description

Webs in the inner surface of the clamps dampen impacts and vibrations and absorb forces along the pipe axis.
A gap between the two halves pretensions the pipe.

Hints

The use of clamps with a smooth inner surface is recommended for retaining hoses and cables. No pretension is applied when fitting and the block height H is reduced to the gap width S1.

Article Table

Product Name External pipe Ø d2 mm External pipe Ø d2 Clamp size e1 mm H mm L mm S1 mm
Product Name External pipe Ø d2 mm External pipe Ø d2 Clamp size e1 mm H mm L mm S1 mm
SRS 106 A PA 6,0 - 1 20 27 34 0,6
SRS 106.4 A PA 6,4 1/4" 1 20 27 34 0,6
SRS 108 A PA 8,0 5/16" 1 20 27 34 0,6
SRS 109.5 A PA 9,5 3/8" 1 20 27 34 0,6
SRS 110 A PA 10,0 - 1 20 27 34 0,6
SRS 112 A PA 12,0 - 1 20 27 34 0,6
SRS 0212.7 PA 12,7 1/2" 2 26 33 40 0,8
SRS 0213.5 PA 13,5 - 2 26 33 40 0,8
SRS 0214 PA 14,0 - 2 26 33 40 0,8
SRS 0215 PA 15,0 - 2 26 33 40 0,8
SRS 0216 PA 16,0 5/8" 2 26 33 40 0,8
SRS 0217.2 PA 17,2 - 2 26 33 40 0,8
SRS 0218 PA 18,0 - 2 26 33 40 0,8
SRS 0319 PA 19,0 3/4" 3 33 35 48 1,0
SRS 0320 PA 20,0 - 3 33 35 48 1,0
SRS 0321.3 PA 21,3 - 3 33 35 48 1,0
SRS 0322 PA 22,0 - 3 33 35 48 1,0
SRS 0325 PA 25,0 1" 3 33 35 48 1,0
SRS 0426.9 PA 26,9 - 4 40 42 57 1,2
SRS 0428 PA 28,0 - 4 40 42 57 1,2
SRS 0430 PA 30,0 - 4 40 42 57 1,2
SRS 0532 PA 32,0 1.1/4" 5 52 58 70 1,2
SRS 0533.7 PA 33,7 - 5 52 58 70 1,2
SRS 0535 PA 35,0 - 5 52 58 70 1,2
SRS 0538 PA 38,0 1.1/2" 5 52 58 70 1,2
SRS 0540 PA 40,0 - 5 52 58 70 1,2
SRS 0542 PA 42,0 - 5 52 58 70 1,2
SRS 0644.5 PA 44,5 1.3/4" 6 66 66 86 1,2
SRS 0645 PA 45,0 - 6 66 66 86 1,2
SRS 0648 PA 48,0 - 6 66 66 86 1,2
SRS 0650 PA 50,0 - 6 66 66 86 1,2
SRS 0650.8 PA 50,8 2" 6 66 66 86 1,2
SRS 0652 PA 52,0 - 6 66 66 86 1,2
SRS 0655 PA 55,0 - 6 66 66 86 1,2
SRS 0657 PA 57,0 2.1/4" 6 66 66 86 1,2

Order hints

1 piece = 2 halves of clamp

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.