SRS 30-100 PP G

Pipe clamp, heavy series



Properties

Construction type Inside of clamp, smooth
Design Single pipe clamp
Series heavy
Standard DIN 3015-2
Material Polypropylene

Description

The use of clamps with a smooth inner surface is recommended for retaining hoses and cables. No pretension is applied when fitting and the block height H is reduced to the gap width S1.

Hints

The use of clamps with a smooth inner surface is recommended for retaining hoses and cables. No pretension is applied when fitting and the block height H is reduced to the gap width S1.

Article Table

Product Name Clamp size External pipe Ø d2 mm External pipe Ø d2 B mm e1 mm H mm L mm S1 mm
Product Name Clamp size External pipe Ø d2 mm External pipe Ø d2 B mm e1 mm H mm L mm S1 mm
SRS 3006 PP G 1 6,0 - 30 33 32 56 2
SRS 3008 PP G 1 8,0 5/16" 30 33 32 56 2
SRS 3010 PP G 1 10,0 - 30 33 32 56 2
SRS 3012 PP G 1 12,0 - 30 33 32 56 2
SRS 3012.7 PP G 1 12,7 1/2" 30 33 32 56 2
SRS 3013.5 PP G 1 13,5 - 30 33 32 56 2
SRS 3014 PP G 1 14,0 - 30 33 32 56 2
SRS 3015 PP G 1 15,0 - 30 33 32 56 2
SRS 3016 PP G 1 16,0 5/8" 30 33 32 56 2
SRS 3017.2 PP G 1 17,2 - 30 33 32 56 2
SRS 3018 PP G 1 18,0 - 30 33 32 56 2
SRS 4019 PP G 2 19,0 3/4" 30 45 48 71 2
SRS 4020 PP G 2 20,0 - 30 45 48 71 2
SRS 4021.3 PP G 2 21,3 - 30 45 48 71 2
SRS 4022 PP G 2 22,0 - 30 45 48 71 2
SRS 4023 PP G 2 23,0 - 30 45 48 71 2
SRS 4025 PP G 2 25,0 1" 30 45 48 71 2
SRS 4026.9 PP G 2 26,9 - 30 45 48 71 2
SRS 4028 PP G 2 28,0 - 30 45 48 71 2
SRS 4030 PP G 2 30,0 - 30 45 48 71 2
SRS 5030 PP G 3 30,0 - 30 60 60 86 2
SRS 5032 PP G 3 32,0 1.1/4" 30 60 60 86 2
SRS 5033.7 PP G 3 33,7 - 30 60 60 86 2
SRS 5035 PP G 3 35,0 - 30 60 60 86 2
SRS 5038 PP G 3 38,0 1.1/2" 30 60 60 86 2
SRS 5040 PP G 3 40,0 - 30 60 60 86 2
SRS 5042 PP G 3 42,0 - 30 60 60 86 2
SRS 6038 PP G 4 38,0 1.1/2" 45 90 90 117 3
SRS 6040 PP G 4 40,0 - 45 90 90 117 3
SRS 6042 PP G 4 42,0 - 45 90 90 117 3
SRS 6045 PP G 4 45,0 - 45 90 90 117 3
SRS 6048.3 PP G 4 48,3 - 45 90 90 117 3
SRS 6050 PP G 4 50,0 - 45 90 90 117 3
SRS 6051 PP G 4 51,0 2" 45 90 90 117 3
SRS 6052 PP G 4 52,0 - 45 90 90 117 3
SRS 6055 PP G 4 55,0 - 45 90 90 117 3
SRS 6057 PP G 4 57,0 2.1/4" 45 90 90 117 3
SRS 6060.3 PP G 4 60,3 - 45 90 90 117 3
SRS 6063 PP G 4 63,0 2.1/2" 45 90 90 117 3
SRS 6065 PP G 4 65,0 - 45 90 90 117 3
SRS 6070 PP G 4 70,0 - 45 90 90 117 3

Order hints

1 piece = 2 halves of clamp

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.