SRS SP D

Welded on base plate for double pipe clamp

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design for twin pipe clamps
Material Steel
Standard DIN 3015-3
Surface phosphate treated

Hints

mit Verdrehsicherung

Article Table

Product Name L mm G Clamp size S mm B mm
Product Name L mm G Clamp size S mm B mm
SRS SP 1 D Welded on base plate for double pipe clamp; Steel; phosphate treated 37 M 6 1 3 30
SRS SP 2 D Welded on base plate for double pipe clamp; Steel; phosphate treated 55 M 8 2 5 30
SRS SP 3 D Welded on base plate for double pipe clamp; Steel; phosphate treated 70 M 8 3 5 30
SRS SP 4 D Welded on base plate for double pipe clamp; Steel; phosphate treated 85 M 8 4 5 30
SRS SP 5 D Welded on base plate for double pipe clamp; Steel; phosphate treated 110 M 8 5 5 30

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.