SVB ND

Hose connectors

  • Image_1 Image_1

Properties

Connection 1 Hose connection
Connection 2 Hose connection
Material Steel
Media Compressed air
Standard DIN 20038

Description

maximum hole size for greatest possible flow rate
rotating nozzle contour enables perfect hose seating

Hints

To be integrated with DIN 20,039 A hose clamps.

Article Table

Product Name for hose ID mm Ø ID mm b mm Operating pressure Length mm
Product Name for hose ID mm Ø ID mm b mm Operating pressure Length mm
SVB 10 ND 10 8.00 11.0 PN 25 75
SVB 13 ND 13 9.00 13.5 PN 25 80
SVB 15 ND 15 12.00 17.0 PN 25 105
SVB 19 ND 19 16.00 21.0 PN 25 105
SVB 25 ND 25 22.00 26.5 PN 25 160
SVB 32 ND 32 27.00 33.5 PN 25 175
SVB 38 ND 38 33.00 40.0 PN 25 215
SVB 50 ND 50 45.00 51.0 PN 25 225
SVB 53 ND 53 46.00 54.0 PN 25 225
Ø ID = Through hole

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.