SV HF

Bulkhead fitting, French series

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction straight
Construction type French series
Design Bulkhead fitting
Material Steel
Scope of supply Socket with union nut and cutting ring
Sealing form 1 + 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L1 mm L4 mm Operating pressure S1 L3 mm AF mm Ø d2 mm G1 S2
Product Name L2 mm L1 mm L4 mm Operating pressure S1 L3 mm AF mm Ø d2 mm G1 S2
SV NW 10 HF 25 47.5 10 PN 400 27 32.5 27 13.25 M 20 x 1.5 27
SV NW 13 HF 26 49.5 11 PN 250 30 34.5 30 16.75 M 24 x 1.5 30
SV NW 16 HF 28 52.0 13 PN 250 36 37.0 36 21.25 M 30 x 1.5 36
SV NW 20 HF 29 54.0 15 PN 160 42 40.0 42 26.75 M 36 x 1.5 42
SV NW 25 HF 33 58.0 19 PN 160 55 44.0 55 33.50 M 45 x 1.5 55
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.