SV HJ IN

Bulkhead fitting socket

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 NPT internal thread
Construction straight
Design Bulkhead fitting socket
Material Steel
Sealing form 1 74° outer cone
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
SV HJ 04 IN 02 1/8" -27 NPT 17 17 7/16"-20 UNF
SV HJ 04 IN 1/4" -18 NPT 19 19 7/16"-20 UNF
SV HJ 05 IN 02 1/8" -27 NPT 17 21 1/2"-20 UNF
SV HJ 05 IN 04 1/4" -18 NPT 17 19 1/2"-20 UNF
SV HJ 06 IN 02 1/8" -27 NPT 21 17 9/16"-18 UNF
SV HJ 06 IN 04 1/4" -18 NPT 21 21 9/16"-18 UNF
SV HJ 06 IN 3/8" -18 NPT 21 25 9/16"-18 UNF
SV HJ 08 IN 04 1/4" -18 NPT 25 21 3/4" -16 UNF
SV HJ 08 IN 06 3/8" -18 NPT 25 25 3/4" -16 UNF
SV HJ 08 IN 1/2" -14 NPT 25 29 3/4" -16 UNF
SV HJ 10 IN 08 1/2" -14 NPT 29 29 7/8" -14 UNF
SV HJ 12 IN 08 1/2" -14 NPT 35 29 1.1/16" -12 UN
SV HJ 12 IN 3/4" -14 NPT 35 35 1.1/16" -12 UN
SV HJ 14 IN 12 3/4" -14 NPT 41 35 1.3/16" -12 UN
SV HJ 16 IN 1" -11.5 NPT 41 41 1.5/16" -12 UN
SV HJ 20 IN 1.1/4" -11.5 NPT 46 46 1.5/8" -12 UN
SV HJ 24 IN 1.1/2" -11.5 NPT 50 50 1.7/8" -12 UN
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.