SV MG

Bulkhead fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction straight
Design Bulkhead fitting
Material Brass
Scope of supply Socket with union nut and cutting ring
Sealing form 1 + 2 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm Operating pressure L4 mm S2 L1 mm L3 mm External pipe Ø mm S1 AF mm G1 Series Ø d2 mm
Product Name L2 mm Operating pressure L4 mm S2 L1 mm L3 mm External pipe Ø mm S1 AF mm G1 Series Ø d2 mm
SV NW 04 HL MG 27.0 PN 200 7.0 14 42 22 6 17 17 M 12 x 1,5 L 6
SV NW 06 HL MG 27.0 PN 200 8.0 17 42 23 8 19 19 M 14 x 1.5 L 8
SV NW 08 HL MG 28.0 PN 200 10.0 19 43 25 10 22 22 M 16 x 1.5 L 10
SV NW 10 HL MG 29.0 PN 200 10.0 22 44 25 12 24 24 M 18 x 1.5 L 12
SV NW 13 HL MG 31.0 PN 200 12.0 27 46 27 15 30 27 M 22 x 1.5 L 15
SV NW 16 HL MG 32.5 PN 200 13.5 32 49 30 18 36 32 M 26 x 1.5 L 18
SV NW 20 HL MG 34.5 PN 100 16.5 36 51 33 22 41 36 M 30 x 2 L 22
SV NW 25 HL MG 35.5 PN 100 18.5 41 52 35 28 46 41 M 36 x 2 L 28
SV NW 03 HS MG 29.0 PN 400 12.0 17 44 27 6 19 19 M 14 x 1.5 S 6
SV NW 04 HS MG 29.0 PN 400 13.0 19 44 28 8 22 22 M 16 x 1.5 S 8
SV NW 06 HS MG 29.5 PN 400 14.5 22 46 31 10 24 24 M 18 x 1.5 S 10
SV NW 08 HS MG 30.5 PN 400 14.5 24 47 31 12 27 27 M 20 x 1.5 S 12
SV NW 13 HS MG 31.5 PN 250 16.5 30 50 35 16 32 32 M 24 x 1.5 S 16
SV NW 16 HS MG 33.5 PN 250 17.5 36 55 39 20 41 41 M 30 x 2 S 20
SV NW 20 HS MG 35.0 PN 250 20.0 46 59 44 25 46 46 M 36 x 2 S 25
SV NW 25 HS MG 37.5 PN 250 21.5 50 64 48 30 50 50 M 42 x 2 S 30
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.