SW 45 HJOF

Bulkhead fitting socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 ORFS external threads
Connection 2 ORFS external threads
Construction Angle 45°
Design Bulkhead fitting socket
Material Steel
Sealing form 1 flat seal with O-ring
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name G1 + G2 OR1 + OR2 S1 AF mm
Product Name G1 + G2 OR1 + OR2 S1 AF mm
SW 45 HJOF 04 9/16"-18 UNF 7.66 x 1.78 22 14
SW 45 HJOF 06 11/16" -16 UN 9.25 x 1.78 27 19
SW 45 HJOF 08 13/16" -16 UN 12.42 x 1.78 30 19
SW 45 HJOF 10 1" -14 UNS 15.60 x 1.78 32 27
SW 45 HJOF 12 1.3/16" -12 UN 18.77 x 1.78 38 30
SW 45 HJOF 16 1.7/16" -12 UN 23.52 x 1.78 46 37
SW 45 HJOF 20 1.11/16" -12 UN 29.87 x 1.78 51 41
SW 45 HJOF 24 2" -12 UN 37.82 x 1.78 60 48
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.