TAF 100

HD hose, type TAF

  • Image_1 Image_1

Properties

Application area High pressure hydraulics and as supply line for technical media.
Besondere Merkmale favourable flow properties, high resistance to light, weathering, aging, chemical media
Colour black
Elongation + 3 % to - 1 %
Inner layer Polyamid (PA)
Insert one polyester braided insert
Online-Shop https://shop.hansa-flex.com/de/TAF100
Outer layer NW 4: Polyamide; from NW 6: Polyurethane
Temp. max. 100 °C
Temp. min. -60 °C

Hints

Montage mit Press- und Schraubanschlüssen.
Die Längenänderung des Schlauches wird bei Prüfung nach EN ISO 1402 bei max.
Betriebsdruck ermittelt.

Article Table

Product Name Außen-Ø nom. mm Innen-Ø nom. mm BD* bei 80°C bar DN* BD* bei 20°C bar BD* bei 50°C bar Zoll Size Biegeradius min. mm
Product Name Außen-Ø nom. mm Innen-Ø nom. mm BD* bei 80°C bar DN* BD* bei 20°C bar BD* bei 50°C bar Zoll Size Biegeradius min. mm
TAF104 8.4 mm 4.0 mm 280 bar 4 370.0 bar 325 bar 3/16" 3 40 mm
TAF106 11.2 mm 6.3 mm 190 bar 6 255.0 bar 225 bar 1/4" 4 63 mm
TAF108 13.3 mm 8.0 mm 170 bar 8 225.0 bar 200 bar 5/16" 5 80 mm
TAF110 16.7 mm 10.0 mm 145 bar 10 190.0 bar 170 bar 3/8" 6 100 mm
TAF113 21.4 mm 13.0 mm 120 bar 12 160.0 bar 140 bar 1/2" 8 130 mm
DN = Nominal diameter, nominal width, BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.