TAF 100 CU

HD hose, type TAF CU, copper braid

Properties

Outer layer	NW 4: Polyamide; from NW 6: Polyurethane
Special features	favourable flow properties, high resistance to light, weathering, aging, chemical media, with copper braid
Insert	one polyester braided insert with interwoven copper braid for dissipating electrostatic charge
Application	Electrically conductive paint spraying hose with high flexibility and low weight
Colour	black
Inner layer	Polyamide
Elongation	+ 3 % to - 1 %
Media	particularly the paints and solvents used in paint spraying, Resistant to many technical media

Hints

Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) by the employers’ liability insurance association. Follow these guidelines when fitting.

Article Table

Product Name	DN*	Size	Inches	Internal Ø mm	External Ø mm	BD* at 20°C bar	BD* at 50°C bar	BD* at 80°C bar	Min. bending radius mm
Product Name	DN*	Size	Inches	Internal Ø mm	External Ø mm	BD* at 20°C bar	BD* at 50°C bar	BD* at 80°C bar	Min. bending radius mm
TAF 104 CU	4	3	3/16"	4,0	8,1	370,0	325	280	40
TAF 106 CU	6	4	1/4"	6,3	11,2	255,0	225	190	63

DN = Nominal diameter, nominal width - BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.

New Customers