TAFZ 100

HD hose, type TAF, twin


Properties

Outer layer NW 4: Polyamide; from NW 6: Polyurethane
Special features favourable flow properties, high resistance to light, weathering, aging, chemical media, Twin hose
Insert one polyester braided insert
Application High pressure hydraulics and as supply line for technical media.
Colour black
Inner layer Polyamide
Elongation + 3 % to - 1 %

Hints

Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm BD* at 20°C bar BD* at 50°C bar BD* at 80°C bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm BD* at 20°C bar BD* at 50°C bar BD* at 80°C bar Min. bending radius mm
TAFZ 104 4 3 3/4" 4,0 8,1 370,0 325 280 40
TAFZ 106 6 4 1/4" 6,3 11,2 255,0 255 190 63
TAFZ 108 8 5 5/16" 8,0 13,3 225,0 200 170 80
TAFZ 110 10 6 3/8" 10,0 16,7 190,0 170 145 100
TAFZ 113 12 8 1/2" 13,0 21,4 160,0 140 120 130
DN = Nominal diameter, nominal width - BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.