TBFZ 200

HD hose, type TBF, twin

  • Image_1 Image_1

Properties

Application area Double hose for high pressure hydraulics and as supply line for technical media
Fitting with press-fit and screw connection hose
Colour black
Elongation + 3 % to - 1 %
Inner layer Polyamid (PA)
Insert two polyester braided inserts
Outer layer NW 4: Polyamide; from NW 6: Polyurethane
Special features Twin hose
favourable flow properties
high resistance to light, weathering, aging, chemical media
Temp. max. 100 °C
Temp. min. -60 °C

Hints

Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm BD* at 80°C bar DN* BD* at 20°C bar BD* at 50°C bar Inches Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm BD* at 80°C bar DN* BD* at 20°C bar BD* at 50°C bar Inches Size Min. bending radius mm
TBFZ 204 9.2 4.0 380 4 485.0 452 3/16" 3 40
TBFZ 206 13.0 6.3 360 6 455.0 400 1/4" 4 63
TBFZ 208 14.9 8.0 300 8 375.0 330 5/16" 5 80
TBFZ 210 18.0 10.0 270 10 340.0 300 3/8" 6 100
TBFZ 213 21.9 13.0 220 12 280.0 245 1/2" 8 130
TBFZ 220 28.1 19.0 170 19 215.0 190 3/4" 12 190
DN = Nominal diameter, nominal width
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.