TE 300 (3TE)

Low pressure hose with textile insert


Properties

Outer layer oil resistant and weatherproof synthetic rubber
Insert two textile braided inserts
Application Low pressure hose for general applications.
Colour black
Inner layer oil resistant synthetic rubber
Elongation to DN 32 +2 % to -4 %, to DN 50 +5 % to -0 %
Media Glycol, Mineral oil, Water (0°C to + 70°C), Water-oil emulsions
Standard EN 854 3 TE

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm External Ø min. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm External Ø min. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
TE 304 5 3 3/16" 4,4 5,2 12,0 13,6 160,0 320 640 40
TE 306 6 4 1/4" 5,9 6,9 13,6 15,2 145,0 290 580 45
TE 308 8 5 5/16" 7,4 8,4 16,1 17,7 130,0 260 520 55
TE 310 10 6 3/8" 9,0 10,0 17,7 19,3 110,0 220 440 70
TE 313 12 8 1/2" 12,1 13,3 20,7 22,7 93,0 186 372 85
TE 316 16 10 5/8" 15,3 16,5 24,9 26,9 80,0 160 320 105
TE 320 19 12 3/4" 18,2 19,8 28,0 30,0 70,0 140 280 130
TE 325 25 16 1" 24,6 26,2 34,4 37,4 55,0 110 220 150
TE 332 31 20 1.1/4" 30,8 32,8 40,8 43,8 45,0 90 180 190
TE 340 38 24 1.1/2" 37,1 39,1 47,6 51,6 40,0 80 160 240
TE 350 51 32 2" 49,8 51,8 60,3 64,3 33,0 66 132 300
TE 360 60 40 2.3/8" 58,5 61,2 70,0 74,0 25,0 50 100 400
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.