Properties

Application area Medium pressure applications with hydraulic fluids (high temperatures) and aggressive media for the chemical industry
Surface technology
2-component systems
Braiding 1 braiding with 1.4301 / 1.4306
Colour metallic
Design Smooth inliner in white PTFE
Inner layer PTFE (polytetrafluoroethylene)
Material PTFE (polytetrafluoroethylene)
Outer layer none
Temp. max. 260 °C
Temp. min. -70 °C

Hints

The pressure values listed apply to hoses only.
Not recommended for high dynamic pressure loads.
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
The tubular fabric has a safety factor (SF) 3 against bursting

Article Table

Product Name DN* Test pressure bar Weight per m kg Operating pressure bar " Internal Ø max. mm Burst pressure bar Internal Ø min. mm Size Min. bending radius mm Inches External Ø min. mm External Ø max. mm
Product Name DN* Test pressure bar Weight per m kg Operating pressure bar " Internal Ø max. mm Burst pressure bar Internal Ø min. mm Size Min. bending radius mm Inches External Ø min. mm External Ø max. mm
TF 104 5 396 0.090 264 3/16 5.4 3 793 5.0 3 64 3/16" 7.5 8.6
TF 106 6 336 0.092 224 1/4 7.0 4 672 6.5 4 76 1/4" 8.8 9.9
TF 108 8 311 0.141 207 5/16 8.7 5 621 8.2 5 102 5/16" 10.5 11.6
TF 110 10 275 0.148 183 3/8 10.6 6 552 9.9 6 133 3/8" 12.8 14.1
TF 113 12 242 0.249 161 1/2 13.4 8 483 13.1 8 152 1/2" 15.9 17.2
TF 116 16 171 0.290 114 5/8 17.1 10 345 16.0 10 178 5/8" 19.0 20.6
TF 120 19 155 0.339 103 3/4 20.3 12 310 19.3 12 203 3/4" 22.2 23.8
TF 125 25 120 0.461 80 1 26.6 16 241 25.8 16 305 1" 28.5 30.1
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.