T HRO HJ

Screw-in socket, T shaped



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 UN/UNF external threads
Design Adjustable direction screw-in socket
Construction T shaped
Sealing form 1 form G
Sealing form 2 + 3 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 + G3 AF mm S1 OR
Product Name G1 G2 + G3 AF mm S1 OR
T HRO 02 HJ 04 G 1/8" -28 7/16"-20 UNF 11 14 8.00 x 2.00
T HRO 02 HJ 05 G 1/8" -28 1/2"-20 UNF 14 14 8.00 x 2.00
T HRO 04 HJ G 1/4" -19 7/16"-20 UNF 11 19 10.77 x 2.62
T HRO 04 HJ 05 G 1/4" -19 1/2"-20 UNF 14 19 10.77 x 2.62
T HRO 04 HJ 06 G 1/4" -19 9/16"-18 UNF 14 19 10.77 x 2.62
T HRO 04 HJ 08 G 1/4" -19 3/4"-16 UNF 19 19 10.77 x 2.62
T HRO 06 HJ 04 G 3/8" -19 7/16"-20 UNF 19 22 13.94 x 2.62
T HRO 06 HJ 05 G 3/8" -19 1/2"-20 UNF 19 22 13.94 x 2.62
T HRO 06 HJ G 3/8" -19 9/16"-18 UNF 19 22 13.94 x 2.62
T HRO 06 HJ 08 G 3/8" -19 3/4"-16 UNF 19 22 13.94 x 2.62
T HRO 06 HJ 10 G 3/8" -19 7/8"-14 UNF 22 22 13.94 x 2.62
T HRO 08 HJ 04 G 1/2" -14 7/16"-20 UNF 22 27 17.86 x 2.62
T HRO 08 HJ 06 G 1/2" -14 9/16"-18 UNF 22 27 17.86 x 2.62
T HRO 08 HJ G 1/2" -14 3/4"-16 UNF 22 27 17.86 x 2.62
T HRO 08 HJ 10 G 1/2" -14 7/8"-14 UNF 22 27 17.86 x 2.62
T HRO 08 HJ 12 G 1/2" -14 1.1/16" -12 UN 27 27 17.86 x 2.62
T HRO 12 HJ 08 G 3/4" -14 3/4"-16 UNF 27 36 23.47 x 2.62
T HRO 12 HJ 10 G 3/4" -14 7/8"-14 UNF 27 36 23.47 x 2.62
T HRO 12 HJ G 3/4" -14 1.1/16" -12 UN 27 36 23.47 x 2.62
T HRO 12 HJ 16 G 3/4" -14 1.5/16" -12 UN 33 36 23.47 x 2.62
T HRO 16 HJ 12 G 1" -11 1.1/16" -12 UN 33 41 29.74 x 3.53
T HRO 16 HJ G 1" -11 1.5/16" -12 UN 33 41 29.74 x 3.53
T HRO 16 HJ 20 G 1" -11 1.5/8" -12 UN 41 41 29.74 x 3.53
T HRO 20 HJ 16 G 1.1/4" -11 1.5/16" -12 UN 41 50 37.69 x 3.53
T HRO 20 HJ G 1.1/4" -11 1.5/8" -12 UN 41 50 37.69 x 3.53
T HRO 20 HJ 24 G 1.1/4" -11 1.7/8" -12 UN 48 50 37.69 x 3.53
T HRO 24 HJ G 1.1/2" -11 1.7/8" -12 UN 48 60 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.