T HROK HJ

Screw-in socket, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 UN/UNF external threads
Construction T shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name S1 AF mm G1 G2 + G3 OR
Product Name S1 AF mm G1 G2 + G3 OR
T HROK 02 HJ 04 14 11 G 1/8" -28 7/16"-20 UNF 8.00 x 2.00
T HROK 02 HJ 05 14 14 G 1/8" -28 1/2"-20 UNF 8.00 x 2.00
T HROK 04 HJ 19 14 G 1/4" -19 7/16"-20 UNF 10.77 x 2.62
T HROK 04 HJ 05 14 14 G 1/4" -19 1/2"-20 UNF 10.77 x 2.62
T HROK 04 HJ 06 19 14 G 1/4" -19 9/16"-18 UNF 10.77 x 2.62
T HROK 04 HJ 08 19 19 G 1/4" -19 3/4" -16 UNF 10.77 x 2.62
T HROK 06 HJ 04 22 19 G 3/8" -19 7/16"-20 UNF 13.94 x 2.62
T HROK 06 HJ 05 22 19 G 3/8" -19 1/2"-20 UNF 13.94 x 2.62
T HROK 06 HJ 22 19 G 3/8" -19 9/16"-18 UNF 13.94 x 2.62
T HROK 06 HJ 08 22 22 G 3/8" -19 3/4" -16 UNF 13.94 x 2.62
T HROK 06 HJ 10 22 22 G 3/8" -19 7/8" -14 UNF 13.94 x 2.62
T HROK 08 HJ 04 27 22 G 1/2" -14 7/16"-20 UNF 17.86 x 2.62
T HROK 08 HJ 06 27 22 G 1/2" -14 9/16"-18 UNF 17.86 x 2.62
T HROK 08 HJ 27 22 G 1/2" -14 3/4" -16 UNF 17.86 x 2.62
T HROK 08 HJ 10 27 22 G 1/2" -14 7/8" -14 UNF 17.86 x 2.62
T HROK 08 HJ 12 27 27 G 1/2" -14 1.1/16" -12 UN 17.86 x 2.62
T HROK 12 HJ 08 36 27 G 3/4" -14 3/4" -16 UNF 23.47 x 2.62
T HROK 12 HJ 10 36 27 G 3/4" -14 7/8" -14 UNF 23.47 x 2.62
T HROK 12 HJ 36 27 G 3/4" -14 1.1/16" -12 UN 23.47 x 2.62
T HROK 12 HJ 16 36 33 G 3/4" -14 1.5/16" -12 UN 23.47 x 2.62
T HROK 16 HJ 12 41 33 G 1" -11 1.1/16" -12 UN 29.74 x 3.53
T HROK 16 HJ 41 33 G 1" -11 1.5/16" -12 UN 29.74 x 3.53
T HROK 16 HJ 20 41 41 G 1" -11 1.5/8" -12 UN 29.74 x 3.53
T HROK 20 HJ 16 50 41 G 1.1/4" -11 1.5/16" -12 UN 37.69 x 3.53
T HROK 20 HJ 50 41 G 1.1/4" -11 1.5/8" -12 UN 37.69 x 3.53
T HROK 20 HJ 24 50 48 G 1.1/4" -11 1.7/8" -12 UN 37.69 x 3.53
T HROK 24 HJ 60 48 G 1.1/2" -11 1.7/8" -12 UN 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.