T IN HJ

Screw-on socket, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT internal thread
Connection 2 + 3 UN/UNF external threads
Construction T shaped
Design Screw-on socket
Material Steel
Sealing form 1 thread seal
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name SW mm G1 G2 + G3
Product Name SW mm G1 G2 + G3
TIN02HJ04 14 mm 1/8" -27 NPT 7/16"-20 UNF
TIN02HJ05 14 mm 1/8" -27 NPT 1/2"-20 UNF
TIN04HJ 19 mm 1/4" -18 NPT 7/16"-20 UNF
TIN04HJ05 19 mm 1/4" -18 NPT 1/2"-20 UNF
TIN04HJ06 19 mm 1/4" -18 NPT 9/16"-18 UNF
TIN04HJ08 19 mm 1/4" -18 NPT 3/4" -16 UNF
TIN06HJ 22 mm 3/8" -18 NPT 9/16"-18 UNF
TIN06HJ08 22 mm 3/8" -18 NPT 3/4" -16 UNF
TIN08HJ10 27 mm 1/2" -14 NPT 7/8" -14 UNF
TIN08HJ12 27 mm 1/2" -14 NPT 1.1/16" -12 UN
TIN12HJ 33 mm 3/4" -14 NPT 1.1/16" -12 UN
TIN16HJ 41 mm 1" -11.5 NPT 1.5/16" -12 UN
TIN20HJ 48 mm 1.1/4" -11.5 NPT 1.5/8" -12 UN
TIN24HJ 64 mm 1.1/2" -11.5 NPT 1.7/8" -12 UN
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.